HTL-550

The Light Duty version of the Nealco™ Hot Tack Applicator boasts SIMPLICITY in design and operation. Just light the torch and adjust the gas pressure to heat up the material. 40 minutes later you are ready to go! Dual bypass valves allow circulation through the piping system to keep the material hot and avoid clogging. A 3-inch stainless steel thermometer shows at-a-glance when it's ready for spraying. The return funnel and cradle keep the hose and wand circulating, so when you go back to spraying, your material is at temperature and the tip is not clogged. When you're done for the day, simply flush the pipes by opening the solvent tank valve and spray into the waste tank for disposal.

The 550 model is a Heavy Duty System, with electronic flame control and hydraulic material pump. Everything you need to get the job done at an UNBEATABLE PRICE!

Need something smaller; more affordable?

A 300 Series is also available for new contractors to try without a substantial initial investment.

	HTL-550T (trailer) / HTL-550S (skid)
Length	174 inches
Width	74 inches
Height	80 inches
Weight	2,200 lbs.
Capacity	550 gallons
Engine	Briggs & Stratton® 900 Series with 6-to-1 gear reduction
Tank	Steel tank with flanged heads, 10-inch sealed manway, vented
Pumping System	Viking internal gear positive displacement pump with 11⁄2-inch ports, dual relief valves allow continuous circulation, 2-inch quick connect for tank fill
Heating System	"Hot Box" heated by 400,000 BTU torch (100,000 BTU on 300 Series), with 50/100-lb. propane tank holder with locking strap, regulator, and pressure gauge. 40-minute heating time!
Hand wand	30 feet of 1⁄2-inch hose and a 5-foot hand wand.
Cleanup System	Solvent tank flushes material out of pipe system into reclamation tank
Optional	Push-button ignitor Padlock (with 2 keys) for locking propane cylinder latch Hose reel (spring loaded/self-retracting) 15-inch suction hose Brush box 100-lb. propane cylinder